RIDEMOUNT / INSTALLATION GUIDE

READY TO RIDE.

Learn how to install your RideMount correctly with our step-by-step guide.

Installation steps

STEP BY STEP

Choose a smooth, stable, and preferably flat surface on your motorcycle. Make sure the camera will not interfere with any moving parts or controls.

Thoroughly clean the selected mounting area. The surface must be completely dry and free from dust, grease, and other contaminants.

Remove the protective film from the adhesive backing.

Carefully position the mount in the desired location and press it firmly and evenly across the entire surface.

Allow sufficient time for the adhesive bond to develop before applying any load. Follow the curing time specified by the adhesive manufacturer.

Attach your camera to the mount and make sure all connections are securely fastened.

Check that the adhesive mount is securely attached before every use.
Only install the mount on suitable surfaces.
Do not reuse a detached adhesive mount without replacing the adhesive with a suitable new adhesive layer.
Whenever possible, secure your camera with an additional safety tether.
Only use the mount while riding within the approved load limits of the product.