Assembly Instructions
Required tools:
• 10/13 spanner for mounting the brackets
• We recommend using a ratchet with a socket
• Tools for dismounting your passenger footrests
Step 1.
Remove passenger footpegs
Remove your left passenger peg (if present). On Yamahas, for example, the rider's seat must be removed.
Step 2.
Assemble holder
Insert the supplied M6 screw through the bracket and fasten the angle by hand-tightening the washer and nut.
Step 3.
Attach bracket
Position the brackets and tighten them hand-tight with the supplied M8 screw in the holes where the passenger footrests were previously mounted.
Depending on the desired position, you can mount the long angle bracket at the front or back.
Step 4.
Attach selfie stick
Insert the selfie stick that fits your mount into the holders and secure it by tightening the knurled screws.
Step 5.
Align
Position the selfie stick so that it is not touching the motorcycle. Then tighten all the screws. Important! The mounts must not be tightened to more than 8 Nm to prevent damage.
Step 6.
