Required tools

  • 10 mm spanner
  • 13 mm spanner
  • 5 mm Allen key
  • Tool for removing the pillion footrests

Assembly with RideMount Selfie Stick

Step 1.

Remove passenger footrests

Dismantle (if present) your left passenger footrest. On Yamaha models, for example, the rider's seat must be removed for this.

Step 2.

Attach selfie stick to mount

  1. First, slide one of the included adapters onto the selfie stick from the top. Position it in the area without the rubber grip.
  2. Then, push an aluminum bracket onto the selfie stick from the bottom until it reaches the adapter. The adapter should audibly click into place and be secured.
  3. Repeat the process with the second adapter and the second aluminum bracket.

Note: Make sure both adapters are fully engaged and the brackets are securely seated.

Step 3.

Mount holder


Attach the aluminum bracket to your motorcycle using the supplied M8 screws. Then align the selfie stick using the elongated holes in the bracket and tighten the screws.

Step 5.

Attach the camera

Done! Now screw your 360° camera onto the selfie stick and enjoy impressive third-person shots on your next ride.
Have a great ride and lots of fun with your RideMount!